Passo du Collemincio from Valfabbrica

Passo du Collemincio can be cycled from 2 sides. Passo di Collemincio from Cerasa is the most popular side, but the summit can also be reached via Passo du Collemincio from Valfabbrica.

Passo du Collemincio from Valfabbrica is a challenging ascent. For this type of climbing, we recommend mountain gearing, specifically a compact system. This means a small front chainring of 34 teeth, combined with a rear cassette where, depending on your level, strength, and experience, you choose a sprocket with 30, 32, or even 34 teeth. Remember that a smooth cadence is always more efficient!

Passo du Collemincio from Valfabbrica is a serious climb and falls into the 2nd category. With a good basic fitness level, even without much cycling experience, you can complete this climb just fine. However, a bike with climbing gears is a must. Without experience or training, it will be really tough – but that’s part of the challenge!

Passo du Collemincio from Valfabbrica is 7.2 km long.

The average gradient of Passo du Collemincio from Valfabbrica is 6.9%.

Passo du Collemincio from Valfabbrica has a steepest segment with an average gradient of 17.4%.

The summit of Passo du Collemincio from Valfabbrica is at 734 m.

At a slow pace of 7 km/h, it takes about 01:02:03 to climb Passo du Collemincio from Valfabbrica. At 11 km/h the time is 00:39:29, and at 15 km/h 00:28:57. For the fastest cyclists, 00:22:51 is an achievable time.

Passo du Collemincio from Valfabbrica is located in the region Perugia in Italy.