Höchsten from Urnau via Wattenberg

Höchsten can be cycled from 8 sides. Höchsten from Deggenhausertal is the most popular side, but the summit can also be reached via Höchsten from Hasenweiler, Höchsten from Obersiggingen, Höchsten from Urnau via Wattenberg, Höchsten from Zussdorf via Lattener Stiege, Höchsten from Wattenberghof, Höchsten from Urnau & Höchsten from Illwangen.

You don't need special gearing for Höchsten from Urnau via Wattenberg. The slope isn't long or steep enough to require much shifting down. You can conquer this climb on power alone. However, a compact gearing system with a smallest front chainring of 34 and largest rear sprocket of 28 or 30 is always nice if you enjoy cycling uphill. This helps maintain a smooth cadence.

Höchsten from Urnau via Wattenberg is a 3rd-category climb. Almost anyone can handle this climb, as long as you have a bike with climbing gears. If you have little training, you will probably need to shift down significantly. For experienced riders, Höchsten from Urnau via Wattenberg is not a problem.

Höchsten from Urnau via Wattenberg is 8.1 km long.

The average gradient of Höchsten from Urnau via Wattenberg is 4.4%.

Höchsten from Urnau via Wattenberg has a steepest segment with an average gradient of 15.2%.

The summit of Höchsten from Urnau via Wattenberg is at 834 m.

At a slow pace of 7 km/h, it takes about 01:09:14 to climb Höchsten from Urnau via Wattenberg. At 11 km/h the time is 00:44:03, and at 15 km/h 00:32:18. For the fastest cyclists, 00:25:30 is an achievable time.

Höchsten from Urnau via Wattenberg is located in the region Tübingen in Germany.